How To Fix Baby Car Seat Belt

Kak zakrepit detskoe avtokreslo v avtomobile, mashine svoimi rukami

To ensure maximum security when installing child safety seats must comply with certain requirements:

To install the child seat only in the back seat of the car. Indeed, in the case of an accident, the airbags available in the car, can injure a baby;
Do not try to squeeze a car seat the front seat of the car;
In case of serious need, and when deactivated or missing airbags in the car, you can secure the seat in the front seat of the car. But this last should push the maximum into it.
The tightening of belts should be carried out with maximum rigidity. Movement of the chair should not exceed two or three inches.

Training and securing a child's car seat with three-point safety belt.

Kak zakrepit detskoe avtokreslo v avtomobile, mashine svoimi rukami

In preparation for securing the car seat should:

To move front seat as far forward as possible;
To remove from the back of the sofa all the foreign objects;
To spread the safety belt of the car;
To put the child seat at the point where it will be mounted. The ideal is the middle of the seat to the chair was located at the same distance from the door to the car.

Kak zakrepit detskoe avtokreslo v avtomobile, mashine svoimi rukami

The procedure for securing child car seats three-point seat belt:

Many seats are available guides. In such cases, you should invest in side slots guide the bottom of the belt. The top area of the strap must be pulled and drawn through the groove. The latter is located above and behind the car seat.
If the car seat has no rails, the belt should be threaded through one side opening and then to hold on the rear wall and bring it through the second hole. Further, the belt should drop down to the ground, and then withdraw to the back.
The end of the belt should snap into the existing lock.

Kak zakrepit detskoe avtokreslo v avtomobile, mashine svoimi rukami

System features simple mounting ISOFIX

Modern manufacturers often set on the back couches of machinery system of attaching child car seats ISOFIX TopTether. This should take into account some important aspects:

Even if the machine belongs to the earlier generations and is devoid of such attachment, it is possible to upgrade your own car and mount this fixture. But it must be remembered that there is no need to install such systems on those machines that did not pass the crash tests with its use.
The ISOFIX TopTether almost invisible, because it is at the base of the rear couch;
Some models in addition to the main used as a third point of support, which is usually called the "anchor" strap.
Car seat with ISOFIX fastening system is capable of very securely fastened to mounted on the car locks.
In the case of the described system virtually eliminates improper Assembly of the chair. However the price of these chairs is significantly greater than the counterparts without ISOFIX.
In the event of a frontal impact increases the danger of injuries of the cervical vertebrae of the baby. Indeed, due to the rigidity of such a fastener on the spine of the child is made a stronger impact.
You can not use an additional seat belts.

Kak zakrepit detskoe avtokreslo v avtomobile, mashine svoimi rukami

Finally, we note that in rare cases, in the car with factory installed fixed base for mounting car seats. Seat adjustment in this case is almost instantaneous and noiseless. However, such a system resides in the cabin. And it is inconvenient. Such fasteners are easy to transport infants.

Choosing the same seat, should focus on the age of the baby, his height, weight, and degree of obedience.